Procéder au paiement
 
** LIQUIDATION **
ABRIS-KIT
ACCESSOIRES DE NETTOYAGE
ACCESSOIRES DE TIR
AIR COMPRIMÉ
ARCHERIE
ARMES A FEU
ARMES USAGÉES
CANONS ET ACTIONS
CHARGEURS
CHASSE
CHASSE AUX DINDONS
CHOKES POUR FUSILS
CONVERSION KIT
CROSSE / CHASSIS
DECORATION
MIRES AJUSTABLES
MONTURES ET ACCESSOIRES POUR OPTIQUE
MUNITION
MUZZLE BREAK
OUTILS
PECHE
RANGEMENT ET TRANSPORT
RECHARGEMENT (RELOAD)
RED DOT
SAC À DOS - TAILLE
SURVIE
TÉLESCOPES
VÊTEMENTS DE CHASSE & AUTRE

 

Accueil catalogue : OUTILS :

[1-16]  [17-17]  [suivant] [voir tout]

Vortex Torque Wrench Gen II
Vortex Torque Wrench Gen II
ajouter au panier
Prix: 199.00$
Vortex Torque Wrench Gen II VT-CTW2

Weaver Deluxe Gunsmith Tool Kit
Weaver Deluxe Gunsmith Tool Kit
ajouter au panier
Prix: 134.99$
Weaver Deluxe Gunsmith Tool Kit (88 pieces) #849719

Weaver Gunsmith Multi-Bit Tool Kit
Weaver Gunsmith Multi-Bit Tool Kit
ajouter au panier
Prix: 74.99$
Weaver Gunsmith Multi-Bit Tool Kit (77 pieces) #849718

Weaver Gunsmithing Hammer and Punch Set
Weaver Gunsmithing Hammer and Punch Set
ajouter au panier
Prix: 54.99$
Weaver Gunsmithing Hammer and Punch Set #849723

Weaver Gunsmithing Torque Wrench
Weaver Gunsmithing Torque Wrench
ajouter au panier
Prix: 136.99$
Weaver Gunsmithing Torque Wrench #849728

Wheeler 89 Pieces Professional-Plus Gunsmithing Screwdriver Set
Wheeler 89 Pieces Professional-Plus Gunsmithing Screwdriver Set
ajouter au panier
Prix: 104.99$
Ensemble d'outils Wheeler 89-Piece Professional-Plus Gunsmithing Screwdriver Set #1004898

Wheeler Deluxe Gunsmithing 89 Pieces Screwdriver Kit
Wheeler Deluxe Gunsmithing 89 Pieces Screwdriver Kit
ajouter au panier
Prix: 129.99$
Wheeler Deluxe Gunsmithing 89 Pieces Screwdriver Kit - 89 Pieces S2 tool Hardened to 56-58 Rockwell C 54 Hollow ground flat bits Phillips, Allen, and Torx bits#562194

Wheeler F.A.T Wrench – Firearm Accurizing Torque Wrench
Wheeler F.A.T Wrench – Firearm Accurizing Torque Wrench
ajouter au panier
Prix: 114.99$
Wheeler F.A.T Wrench – Firearm Accurizing Torque Wrench #553556

Wheeler Gunsmithing Screwdriver Kit (72-Piece)
Wheeler Gunsmithing Screwdriver Kit (72-Piece)
ajouter au panier
Prix: 89.99$
Wheeler Gunsmithing Screwdriver Kit (72-Piece) #1004899

Wheeler Hammer and Punch Set In Plastic Case
Wheeler Hammer and Punch Set In Plastic Case
ajouter au panier
Prix: 62.99$
Wheeler Hammer and Punch Set In Plastic Case #951900

Wheeler Precision Micro Screwdriver Set With Case (58 Piece Set)
Wheeler Precision Micro Screwdriver Set With Case (58 Piece Set)
ajouter au panier
Prix: 44.99$
Wheeler 564018 Precision Micro Screwdriver Set With Case (58 Piece Set)

Wheeler Pro Scope Mounting
Wheeler Pro Scope Mounting
ajouter au panier
Prix: 179.99$
Wheeler Pro Scope Mounting Kit #545454

Wheeler Professional Gunsmithing Screwdriver Set (43-Piece)
Wheeler Professional Gunsmithing Screwdriver Set (43-Piece)
ajouter au panier
Prix: 65.99$
Wheeler Professional Gunsmithing Screwdriver Set (43-Piece) #954621

Wheeler Professional Retical Leveling System
Wheeler Professional Retical Leveling System
ajouter au panier
Prix: 99.99$
Technological advances in today’s modern firearms, ammunition and optics have enhanced the potential for long range accuracy. However, precision mounting and alignment of your system’s scope is critical to realizing the accuracy. A scope’s reticle must be precisely aligned with the weapon to ensure holdover or turret adjustments for bullet drop produce true vertical compensation for point of impact. If the crosshairs are canted left or right both elevation and windage bullet impact error will occur. The Wheeler® Professional Reticle Leveling System is a precision tool and technique designed to allow a scope to be perfectly leveled on any firearm with ease. CNC machining, factory adjusted calibration set screws, anodized aluminum construction and protective molded case put this instrument in a class of its own. The system is comprised of two machined aluminum level housings calibrated to their integrated levels. The Barrel Clamp Level is attached to the guns barrel while the smaller Reference Level is placed on scope base, bottom half of a ring or other flat surface perpendicular to the vertical axis of the gun. The gun is then rotated until the Reference Level is aligned. The tuning adjustment knob on the Barrel Clamp Level is then turned until its level is centered to match the Reference Level. At this point the Barrel Clamp Level is calibrated to the guns axis. The Scope can be installed loosely and the Reference Level placed on top of the scopes turret cap. The scope is rotated until the Reference Level is aligned with the Barrel Clamp Level and then simply secured in place. The Wheeler PRLS is the most effective instrument available for precision scope alignment. Precision tool for scope reticle alignment Factory calibrated Reference Level Maximize accuracy potential Tunable Barrel Clamp Level CNC machined aluminum level housings Protective storage case #119050

Wheeler Scope Ring Alignment & Lapping Kit 1
Wheeler Scope Ring Alignment & Lapping Kit 1" to 30MM
ajouter au panier
Prix: 139.99$
When installing a scope, aligning and lapping of new rings should become the standard practice. The alignment bars in this kit provide for perfect alignment of both rings and will also diagnose any misalignment problem, vertical or horizontal, giving you the opportunity to fix the problem before damaging the scope or experiencing frustration at the range. The lapping bar is used to lap the rings to improve alignment, reduce stress on the scope and improve the grip of the rings on the scope. It also serves as a lever to rotate dovetail rings into place. Lapping the rings can also minimize or prevent ring marring of the scope. Kit includes: Two 1″ alignment bars 1″ lapping bar Two 30mm alignment bars 30mm lapping bar lapping bar handle 220 grit lapping compound complete instructions #305172

Wheeler Space Saver Screwdriver Set
Wheeler Space Saver Screwdriver Set
ajouter au panier
Prix: 24.99$
The Wheeler Space Saver Gunsmithing Screwdriver Set takes up very little space on your bench, but contains a durable and comprehensive set of 26 bits chosen to meet most of your gunsmithing needs. It's also the perfect size to include on your trips to the range and the field. Included with the standard, Phillips, hex, and torx bits, is a 2" long #2 Phillips bit which is ideal for recoil pad installation, and a hex-to-square conversion bit which allows you to use 1/4" square drive sockets and other attachments. The magnetic handle is perfectly sized for gunsmithing needs, and is also hollow-handled, allowing you to carry a variety of bits should the need arise. #664507

[1-16]  [17-17]  [suivant] [voir tout]
 

Copyright © Danchasse.com. Tous droits réservés.